VT#: 35-0286
OEM Part Number: 27020-40
Four bolt intake manifold for Linkert carburetor is cast iron with zinc plating. Installation requires the nipples to be screwed into the cylinder depth so that the manifold alignment is correct.
K 1952-1956
WR 1941-1952
KH 1954-1956
To install the WR manifold on a 45" cylinder, on W and G models, the intake manifold nipples must be replaced with #9423-1 larger nipples.
Suggested to use with #35-1707 Manifold Nipple Set
To be installed on WL models 0.100" must be machined from eash spigot for a total of 0.200" overall.