VT#: 10-0634
Jims standard hydraulic tappet has an outer diameter of .731". Tappets are without internals. Order adjuster screws and nuts separately.
**NOTE:Tappet adjustment will make the pushrod tight. Wait 5-15 minutes or longer to fully bleed off the hydraulic tappet. Make sure engine is not rotated while pushrods are tight. Pushrod will spin with your fingers after the tappet has bled off. Never turn engine over if the tappet will not spin with your fingers after adjustments were made.
FL Electra Glide® 1953-1984
FX Super Glide® 1971-1984
FLT Tour Glide® 1979-1983
FXR Super Glide® 1982-1983