VT#: 52-0745

16" X 3.0" front or rear wheel assembly includes black finish hub, rim and 40 stainless steel spokes. This wheel assembly also includes lock screw, seal spacer, tube spacer and one bearing. The hub must be supported by a brake drum or front brake disc flange adapter. The front drum uses one bearing, the rear drum sprocket usues two bearings. The valve stem hole is on the star side of the hub.
NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of original installation.

FL Electra Glide® 1967-1972 Front or Rear
FX Super Glide® 1971-1972 Rear

When looking at the star side of the wheel, the inner layer of spokes should point clockwise.
Rim width is measured by the distance between the rim flanges.
Suggested to use with #45-0314 front brake disc flange adapter